- Open the gate behind the device (Figure 1), and find the power input on the right side of the terminal.
- Connect the plug from the power adapter into the power input (Figure 2).
- Plug the power adapter into a 120-volt electrical outlet or into a surge suppressor (recommended) after the power cord is connected to the power adapter
- After the power cord is connected to the power adapter. Press the red “Cancel” button at the front of device until the system is booted up.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used.
