If the PAXS300 needs an application update it must have the internal memory cleared prior to power cycling in order to download the new application. The steps below outline this process.

Getting Started:

1. Press Menu.
2. Enter the password.
   • NOTE - If you don't have the password, contact Support for assistance.

If the Menu key does not respond:

1. Press the FUNC and 1 keys at the same time.
2. Enter the password.
   • NOTE - If you don't have the password, contact Support for assistance.

Clear the Internal Memory:

1. Select System Settings in the device menu.
2. NOTE - You may have to touch the down arrow to find this in the menu.
3. Select Database.
4. Enter the password.
5. Select Clear Database.
6. Press Yes to confirm.
7. Select All.
8. The database will clear and return you to the previous menu selection.

Cycle the Power

1. Unplug the power cable.
2. Wait for 10 seconds.
3. Plug it back into the terminal.
4. The terminal will reinitialize and download the new configuration.
   • NOTE - This may take several minutes.
5. Once the terminal displays the idle screen the process is complete.